Pool Salt Cell Cleaning in Beaumont, CA

Benchmark Pool Services provides professional salt cell cleaning throughout Beaumont. We safely remove stubborn calcium scale to restore your chlorinator's efficiency and protect your investment.

Cell Inspection

We carefully remove the salt cell and visually inspect the titanium plates for calcium bridging and scale buildup.

Acid Washing

We use a properly diluted acid solution to dissolve calcium deposits without damaging the delicate coating on the cell plates.

Flow Switch Check

We inspect and clean the flow switch, ensuring it accurately detects water movement to safely operate the chlorinator.

System Diagnostics

We check the control panel for error codes, verify the salinity readings, and ensure the system is communicating correctly.

O-Ring Lubrication

We clean and lubricate the connection O-rings before reassembling the cell to prevent leaks and ensure a tight seal.

Output Verification

After cleaning and reinstalling, we turn the system back on to verify that chlorine production has resumed at the proper levels.

Salt System Brands

We service all major salt chlorinator brands, including Pentair IntelliChlor, Hayward AquaRite, and Jandy AquaPure. Our technicians know how to safely remove, clean, and test the cells for these specific systems without damaging the internal sensors or delicate titanium plates.

Safe Cleaning Solutions

We use precisely diluted muriatic acid solutions and specialized cleaning stands to dissolve calcium scale safely. Using acid that is too strong can strip the ruthenium or iridium coating off the plates, ruining the cell. We ensure the cleaning process is effective yet gentle enough to protect your equipment.

System Check

We check the control panel for error codes and verify the pool's current salinity levels before touching the equipment.

Safe Removal

We turn off all power, disconnect the cell from the plumbing, and inspect the plates for calcium bridging.

Acid Wash

We cap one end of the cell and soak the plates in a diluted cleaning solution until the bubbling stops and the scale is gone.

Reinstallation

We rinse the cell, lubricate the O-rings, reinstall the unit, and verify that chlorine production has restarted.

Warning Signs You Need a Salt Cell Cleaning

A scaled-up salt cell cannot produce chlorine, which quickly leads to poor water quality. Watch for these signs that it is time for a professional cleaning in Beaumont:

• The 'Inspect Cell' or 'Low Chlorine' warning light is flashing on your control panel.
• Your pool water is becoming cloudy or developing algae despite the system running its normal schedule.
• You can visibly see white, crusty calcium buildup between the metal plates inside the clear cell housing.
• Your chlorine levels test consistently low, even when you turn up the output percentage on the controller.

When Cleaning Restores Function

If your salt cell is less than 3-5 years old and the only issue is heavy calcium scale, a professional cleaning will almost always restore it to full working order. Regular cleanings are the best way to ensure your cell reaches its maximum lifespan.

When Replacement is Necessary

Salt cells have a finite lifespan, typically around 10,000 hours of operation. If we clean the cell thoroughly and it still fails to produce chlorine or the control board indicates a depleted cell, it is time for a replacement. We will provide a free written quote for a new unit if needed.